Converter Upper Panel; Wiring The Power Inputs - Planet IGTP-802T User Manual

2.1.4 Converter Upper Panel

The upper panel of the Industrial 802.3at PoE Media Converter consists
of one terminal block connector within two DC power inputs. Figure 2-3
shows the upper panel of the Industrial 802.3at PoE Media Converter.
Figure 2-3: Industrial 802.3at PoE Media Converter Upper Panel

2.1.5 Wiring the Power Inputs

The 6-contact terminal block connector on the top panel of Industrial
802.3at PoE Media Converter is used for two DC redundant power
inputs. Please follow the steps below to insert the power wire.
1. Insert positive/negative DC power wires into contacts 1 and 2 for
POWER 1, or 5 and 6 for POWER 2.
1 2 3 4 5 6
V1+ V1- V2+ V2-
PWR1 Fault PWR2
1 2 3 4 5 6
V1+ V1- V2+ V2-
PWR1 Fault PWR2
V1+ V1- V2+ V2-
Input
DC12~48V, AC 24V
Input
DC12~48V, AC 24V
17