Removing The Robotic Pool Cleaner From The Pool - Maytronics Dolphin wave 90i User Instructions

5.7 Removing the robotic pool cleaner from the pool

Option A
The easiest and most fun way to get the robot out of the water:
1. Log into the MyDolphin™ Plus app and click "Pick-up mode".
2. The robot will reach the wall closest to it and will climb to the water surface.
3. Grab the robot by the handle and pull it out the water.
Option B
5.7.1
5.7.2
5.7.3
Turn OFF the power supply.
WARNING
Place the robotic pool cleaner on the edge of the pool
and let the water drain out before lifting.
Use the cable to pull the robotic
pool cleaner to the side of the pool.
Use the handle to remove the robot
from the pool.
Please use the cable to pull
the robot to the surface,
WARNING
then use the handle.
Wave 90i User Instructions
|
8