Introduction; Specifications; Warnings And Cautions - Maytronics Dolphin wave 90i User Instructions

1. INTRODUCTION

Thank you for purchasing a Maytronics robotic pool cleaner.
We are sure that your Maytronics robotic pool cleaner will provide you with reliable, convenient and
cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface climbing brush
enhance maximum pool hygiene.
The robotic pool cleaners by Maytronics deliver advanced cleaning technology, long lasting performance
and easy maintenance.

2. SPECIFICATIONS

Robot
Motor protection: IP68
Minimum depth: 0.4 m (1.33 ft)
Maximum depth: 5 m (16.4 ft)

3. WARNINGS AND CAUTIONS

IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
Please adhere strictly to the following WARNINGS:
Take the robotic pool cleaner out of the pool before allowing people to enter the pool.
WARNING
When examining the robotic pool cleaner, disconnect the main power supply.
WARNING
Ensure that children do not attempt to access the robotic pool cleaner while it is operating.
Keep the robotic pool cleaner out of the reach of children or persons with reduced physical,
WARNING sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction.
Only an original power cord must be used, at all times. If damaged, it must be replaced by a robotic
pool cleaner certified technician to avoid hazards. certified technician, in case of need to avoid
WARNING
hazard.
To reduce the risk of electric shock replace damaged cord immedietely.
WARNING
Do not use an extension cord to connect the robot to the outlet; provide a properly located outlet.
WARNING
Digital switch-mode power supply
IP54
Input: 100 VAC to 250 VAC, 50 Hz to 60 Hz, 180 W
Output: <30 VDC
Bluetooth® max output < 5.8mW
Wi-Fi® max output < 76mW - Frequency 2.4MHz
Wave 90i
2
User Instructions
|