Mydolphin™ Plus App Operation; Getting Started With The Mydolphin™ Plus App; Prepare The Pool Cleaner For Connection; Activate The Pool Cleaner Using Your Mobile Smart Device - Maytronics Dolphin wave 90i User Instructions

10. MyDolphin™ Plus App OPERATION
10.1 Getting started with the MyDolphin™ Plus app
The app is compatible with the following smart devices:
• Apple (iOS) - version 10 and up - iPhone, iPad, iPod
• Android – version 5 and up operating system
1. Make sure your mobile smart device (phone/tablet) is connected to the internet.
2. Make sure you have your Wi-Fi® network name and password in reach.
3. The power supply connects to WiFi® 2.4GHz only. If you have a dual-band router, separate the 2.4 and
5GHz networks and give them unique names. You can find instructions for your router brand online or
consult your internet provider.
4. Ensure Bluetooth® is enabled on your smartphone.
5. Android users - please make sure your GPS / Location Services are ON.
6. For iOS 13 only - while the app is working, enable Bluetooth® & location.

10.2 Prepare the pool cleaner for connection

1. Connect the blue cable to the power supply and the power cable from the power supply
to the electrical outlet.
2. The connectivity LED light indicator on your power supply will start flashing blue.
3. Place the pool cleaner in the water.
4. Press the ON button on your IoT power supply, to start the pool cleaner.

10.3 Activate the pool cleaner using your mobile smart device

1. Activate the MyDolphin™ Plus app.
2. Sign up by creating an account or use your Gmail/Facebook accounts.
3. Allow all required permissions.
4. Wait for the steady blue
The app will start pairing with your power supply. Follow the app instructions to connect with the robot.
5 Connect to your home/pool Wi-Fi® network.
6. Enter the password of your home Wi-Fi® network, and press CONTINUE.
After a short while, your power supply will flash
7. Wait for the steady green
NOTE: Next time you open the app, you will be able to fill in the warranty via the app.
TIPS:
• If the app is stuck on the same screen for over 2 minutes, close the app and re-open it.
• To test your Wi-Fi® signal strength and quality, stand next to the power supply and play a video
via your smart phone browser.
connectivity LED light and a success message in the app.
connectivity LED light and a success message in the app.
green and blue.
Wave 90i
16
User Instructions
|