Using The Robotic Pool Cleaner; Setup - Maytronics Dolphin wave 90i User Instructions

5. USING THE ROBOTIC POOL CLEANER

5.1 Setup

. m ft.
5.1.1
Position the power
supply at approximately the
middle of the long side of the
pool, at least at a distance
of 3.5 m (12 ft).
It is crucial that the power supply doesn't fall into the water and is kept 11cm/4"
above the ground.
WARNING
5.1.3
Attach the blue cable to the power
supply: Insert the cable with the notch on
the connector (1), lined up with the groove
in the socket on the power supply, and turn
clockwise (2).
5.1.2
Unwind the cable to ensure that it has no kinks.
Wave 90i User Instructions
|
5