5.3. Removing the Pool Cleaner from the pool ....... 5 6. CLEANING THE FILTER BASKET – MODEL M1B ......7 7. CLEANING THE FILTER BASKET – MODEL M1 / MT1 ..... 8 7.1. Cleaning after use ..............8 7.2. Periodic cleaning ..............9 8.
1. INTRODUCTION Thank you for purchasing a Maytronics Robotic Pool Cleaner. We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and cost-effective pool cleaning. Its reliable filtration in all pool conditions and active brushing, enhance pool hygiene.
4. POOL CLEANER PARTS Robotic Pool Cleaner Model M1 / M1B / MT1 Power supply unit Filtration Model M1B Filtration Model M1 / MT1 Robotic Pool Cleaner M1 / M1B / MT1 User Instructions...
Plug in the power supply and leave it in the supply by inserting it with the notch on the OFF position. connector (1), lined up with the groove in the socket on the power supply, and turning clockwise (2). Robotic Pool Cleaner M1 / M1B / MT1 User Instructions...
Make sure that the floating cable is free of any obstructions. 5.3 Removing the Pool Cleaner from the pool Turn OFF and unplug the power supply. CAUTION 5.3.1 Robotic Pool Cleaner M1 / M1B / MT1 User Instructions...
Page 8
DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE. CAUTION 5.3.3 Place the Pool Cleaner on the edge of the pool and let the water drain out. Robotic Pool Cleaner M1 / M1B / MT1 User Instructions...
Note: Do not let the filter basket dry out before cleaning. Cleaning after use - removing and cleaning the filter basket Open the filter cover. Lift up the filter basket. Clean the filter basket with a hose. Robotic Pool Cleaner M1 / M1B / MT1 User Instructions...
7. CLEANING THE FILTER BASKET - MODEL M1 / MT1 Make sure the power supply is switched off and unplugged. CAUTION It is highly recommended to clean the filter basket after each cleaning cycle. Note: Do not let the filter basket dry out before cleaning.
Dismantle the 2 panels using your thumbs. 7.2.2 Clean the filter panels with a hose. 7.2.3 Assemble the filter panels. 7.2.4 Insert the clean filter basket and close the filter cover. Robotic Pool Cleaner M1 / M1B / MT1 User Instructions...
If the debris is not reachable follow the next screwdriver open the 2 screws. steps. Pull the impeller cover backwards to release it. Clean the debris trapped around the impeller. Assemble the impeller cover. Robotic Pool Cleaner M1 / M1B / MT1 User Instructions...
If so, adjust the levels and scrub the walls. • Debris stuck in the impeller-house or • Remove debris stuck in the impeller-house or impeller-cover impeller-cover. (according to the drawings). Robotic Pool Cleaner M1 / M1B / MT1 User Instructions...