5.2 Putting the Pool Cleaner into the pool ........5 5.3 Removing the Pool Cleaner from the pool ......6 5.4 Maintenance ................6 5.5 Off-season storage ..............7 6. POWER SUPPLY ................8 7. REMOTE CONTROL UNIT ............9 CADDY ASSEMBLY ................11 Dolphin Wave 75 Pool Cleaner | Operating Instructions...
Thank you for purchasing a Maytronics Robotic Pool Cleaner. We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface climbing brush enhance maximum pool hygiene.
All surface climbing brush ideal for most pool surfaces Optional Brushes PVC Brush Wonder Brush For concrete, PVC, For smooth ceramics. fiberglass and liner. Power supply unit Filtration Bottom lid and filter Bag Dolphin Wave 75 Pool Cleaner | Operating Instructions...
NaCl Let it sink to the pool floor. 4000 ppm Turn the power supply ON. The Pool Cleaner will now operate until it has reached the end of the cleaning cycle. Dolphin Wave 75 Pool Cleaner | Operating Instructions...
Filter bag Clean the filter bag with a hose. Periodically clean the brushes with a hose. It is recommended to periodically wash the filter bag in a washing machine. Use gentle cycle program. Dolphin Wave 75 Pool Cleaner | Operating Instructions...
• Roll up the cable so that it has no kinks and place on the Caddy. • Store the pool cleaner upright on the Caddy in a protected area out of direct sun/rain/frost at a temperature of between 5°C - 45°C (41°F - 113°F). Dolphin Wave 75 Pool Cleaner | Operating Instructions...
If the LED does not turn off after the filter bag had been emptied and cleaned, press the RESET button while the robot is working. Delay indicator The power supply is equipped with a Delay indicator that indicates if the Delay option is activated (through the remote control unit). Dolphin Wave 75 Pool Cleaner | Operating Instructions...
1. To change the parameters press the up or down arrows. 2. To select the parameter settings use the right or left arrows. When you reach the required function press the Set/OK button. Dolphin Wave 75 Pool Cleaner | Operating Instructions...
Page 10
• After 2 minute if no button is pressed, the Remote Control Unit will shut-down and the Pool cleaner will continue to work in the previous settings. • When the "Ultra-Clean" and "Walls Only" options finish their cycles, the Pool Cleaner will return to default settings. Dolphin Wave 75 Pool Cleaner | Operating Instructions...
Need help?
Do you have a question about the Dolphin Wave 75 and is the answer not in the manual?
Questions and answers