Power Supply - Troubleshooting - Maytronics Dolphin wave 90i User Instructions

12. POWER SUPPLY - TROUBLESHOOTING

Symptom Possible reason
The power supply • No voltage in the power socket in the wall.
or its ON/OFF LED
• The power supply is not ON.
are not working.
• The power cord is not properly connected
to the power supply inlet.
• The Ground Fault Interrupter is OFF.
Can not connect The power supply is too far from the router
to your Wi-Fi®, (weak signal) or your router is not working
and the properly.
communication
LED is blinking
Green.
Cannot connect The power supply is too far from the smart
to your robotic device, or your Bluetooth® is disabled, or not
pool cleaner via working properly.
Bluetooth®,
and the
communication
LED is blinking Blue.
Orange Filter is clogged.
Steady
light on the power
supply unit.
* In selected
models only
Corrective action
• Make sure that there is voltage in the power socket in the wall.
• Make sure that the power supply is plugged in and turned ON.
• Make sure that the power cord is securely connected all the
way into the power supply.
• Turn OFF the power supply. Wait 30 seconds, then turn ON.
• Reset the power supply (disconnect the power cord),
and wait 1 min.
• Check that your smartphone has a strong Wi-Fi® connectivity
near the power supply (stand next to the power supply and try
to play any online video streaming application).
• Check if the home router is working properly.
• Locate the power supply as close as possible to the
home router.
• Consider installing a Wi-Fi® extender 2.4 GHz to ensure that
you have a sufficient signal strength.
• Note: In case the communication LED is still blinking Green, you
have the option to connect via Bluetooth®.
• Try to turn your smartphone Bluetooth® Off and then On.
• Get closer to the power supply.
• Ensure that you don't have any obstructions or obstacles
between you and the power supply.
• Turn the power supply OFF and then ON.
• If none of the above troubleshooting helps, contact the dealer
for further support.
• Please clean the filter.
• We highly recommend cleaning the filter basket after each
cleaning cycle. The robot works more effectively when the
filter is clean.
Wave 90i
18
User Instructions
|