Getting Started With The Remote Control; Programmable Mode; Manual Drive Mode - Maytronics Dolphin wave 90i User Instructions

8.1 Getting started with the remote control

1. Download the MyDolphin Plus moblie app, and complete the registration process, in order to
TM
activate the features.
2. Make sure the remote control is OFF.
3. Plug in the power supply.
4. Attach the remote control to the power supply.
5. Press simultaneously on both right and left direction control arrows until you hear two beep
sounds and you have a clear view of the remote control screen.

8.2 Programmable mode

The remote control unit offers the following programmable operation modes:
1. Cleaning mode - floor or floor and walls (see page 14)
2. Duration - 2h/3h/4h (see page 14)
3. Delay - 1 hour delay - available if connected to MyDolphin Plus app
TM
4. Schedule - every second day or every third day
5. Pick up (see page 9)
6. On / Off
In Delayed Operation mode, you can set the Pool Cleaner to clean the pool after the debris has
settled to the floor, by pressing START LATER.
The power supply will start blinking green. After one hour, the Pool Cleaner will start working.
If you wish to cancel the START LATER program, press again on the START LATER icon.
When the power supply stops blinking, the program is canceled.
In the Weekly Scheduling mode, you can set your own cleaning program. You can choose if you want
to clean your pool every two days or every three days.
This feature requires leaving the robot in the water for the whole week. To minimize wear and tear,
we recommend taking the robotic pool cleaner out after each use to rinse the robot and filter.
Using the weekly scheduler will accelerate wear and tear because the robot remains in the pool with
its chemicals. Also, if the filter isn't rinsed the robot cleaning efficiency is reduced.
• To clean your pool every 2 days, press
• To clean your pool every 3 days, press
• The scheduling program is valid for one week only. If you program the weekly timer in the
MyDolphin Plus app, you can set it to 'repeat' and the scheduling program will continue week after
TM
week. Again, leaving the robot in the water increases its wear and tear while reducing its cleaning
efficiency.

8.3 Manual drive mode

You can use the Manual Drive mode to control how your Dolphin pool cleaner navigates around the pool.
Note: Due to its wireless functionality, there might be a delay between your command and when the
robot is able to follow. If you want to turn, hold the left or right key for 2-4 seconds and wait to see if
the robot is facing the desired direction.
• If the robot is ON - Turn on the remote, press the mode selector, and use the direction control
arrows to control the movement of the robot around the pool.
14
Wave 90i User Instructions
|