Operating The Robotic Pool Cleaner Without Using Your Smart Device; Using The Power Supply; Robotic Pool Cleaner Indicator Lights - Maytronics Dolphin wave 90i User Instructions

5.4 Operating the robotic pool cleaner without using your smart device

5.5 Using the power supply

Your power supply is designed to provide you with the most advanced
features to improve your experience.
• A single ON/OFF button for an easy operation.
• LED indicators for the advanced features.
LED indications table:
Lights display
Blue circle Blinks 4 times
Blue connectivity light is consistent
Green and Blue connectivity lights
blink alternately
Green connectivity light is on

5.6 Robotic pool cleaner indicator lights

Light Indication
Blue blinking Normal operation of the robotic pool cleaner
Remote control or Smartphone communicate
Green blinking
with the robotic pool cleaner
Robot error. Check the Troubleshooting section
for solutions
Red constant
If none of the solutions solve the issue,
contact your dealer to check the robotic pool
cleaner
Press the power button to turn the robot ON.
If the robotic pool cleaner is in the water, it will now operate
until it has reached the end of the cleaning cycle.
NOTE: Pressing the power button for more than 5 seconds
will trigger the weekly timer every 2nd day. You can use this
to allow debris enough time to settle to the pool floor before
the robot starts its cleaning cycle.
Meaning
Occurs after connecting the power-supply to the
power outlet
Bluetooth® connected
Pairing process is ongoing
Wi-Fi® connected to home network
Indicator lights
5.6.1
Indicator lights
Wave 90i User Instructions
|
7