Introduction; Specifications; Warnings And Cautions; Warnings - Maytronics BASIC 2 Operating Instructions Manual

Robotic Pool Cleaner BASIC 2

Operating Instructions

1. INTRODUCTION

Thank you for purchasing a Maytronics Pool Cleaner.
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and
cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface climbing brush
enhance maximum pool hygiene.
The Robotic Pool Cleaner by Maytronics deliver advanced cleaning technologys, long lasting
performance and easy maintenance.

2. SPECIFICATIONS

Motor protection: IP 68
Minimum depth: 0.80m / 2.6ft
Maximum depth: 5m / 16.4ft

3. WARNINGS AND CAUTIONS

3.1. Warnings

Use the originally supplied power supply only
•
Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
•
leakage interrupter (ELI)
Keep the power supply out of standing water
•
Position the power supply at least 3m / 10ft away from the edge of the pool
•
CAUTION
Do not enter the pool while the pool cleaner is working
•
Unplug the power supply before servicing
•

3.2. Cautions

Use the Pool Cleaner in the following water conditions only:
Chlorine Max 4 ppm
pH 7.0 - 7.8
Temperature 6 – 34°C / 43-93°F
NaCl Maximum = 5000 ppm
2
Power Supply
Digital "Switch-Mode" Power Supply
• Input - 100-250 AC Volts
• 50-60 Hertz
• 180 Watt
• Output - <30 VDC
• IP 54
Robotic Pool Cleaner BASIC 2 | Operating Instructions