Advertisement
Quick Links
Advertisement
Related Manuals for Maytronics MBC2
Summary of Contents for Maytronics MBC2
- Page 1 Robot Pool Cleaner MBC2 User Instructions MBC2 8151254...
-
Page 3: Warnings And Cautions
Use the Pool Cleaner in the following water conditions only: Chlorine Max 4 ppm 7.0 - 7.8 Temperature 6 – 34°C NaCl Maximum = 5000 ppm Specifications Motor protection: IP 68 Minimum depth: 0.80m Maximum depth: 5m 40°C Max GFI/ELI Set-up Robot Pool Cleaner MBC2 | User Instructions... - Page 4 (2). Operation • Turn the power supply ON. The Pool Cleaner will now operate until it has reached the end of the cleaning cycle. Robot Pool Cleaner MBC2 | User Instructions...
- Page 5 • Using the floating cable, bring the Pool Cleaner to the pool's edge. Using the handles remove the Pool Cleaner from the pool. • Do not pull the Pool Cleaner from the pool using the cable. Robot Pool Cleaner MBC2 | User Instructions...
- Page 6 Maintenance • Place the Pool Cleaner on the edge of the pool and let the water drain out. Robot Pool Cleaner MBC2 | User Instructions...
- Page 7 Use gentle cycle cleaning program. • Periodically clean the brushes with a hose. • Refit the filter bag with the tag on the outside positioned centrally along the length side of the bottom lid. Robot Pool Cleaner MBC2 | User Instructions...
- Page 8 Press down on the impeller cover in the direction of the spring, pushing it into place. Replace the screws. Robot Pool Cleaner MBC2 | User Instructions...
- Page 9 • Thoroughly clean the filter bag and insert in place. • Roll up the cable so that it has no kinks. • Store the Pool Cleaner in a protected area upside down (not on its brushes). Robot Pool Cleaner MBC2 | User Instructions...
- Page 12 Robot Pool Cleaner MBC2 MBC2 8151254...