Tm Plus App User Guide; Getting Started With The Mydolphin™ Plus App; Prepare The Pool Cleaner For Connection; Activate The Pool Cleaner Using Your Mobile Smart Device - Maytronics Dolphin Liberty 200 User Instructions

8. MyDolphin™ Plus APP USER GUIDE
8.1 Getting Started with the MyDolphin™ Plus App
The app is compatible with the following smart devices:
• Apple (iOS) – version 10 and up – iPhone, iPad, iPod
• Android – version 5 and up operating system
1. Ensure Bluetooth® is enabled on your smart device.
2. Android users - please make sure your GPS and Location Services are ON.
3. For iOS 13 only - while the app is working, enable Bluetooth® & location.

8.2 Prepare the Pool Cleaner for Connection

Connect the Pool Cleaner to the charger. This turns on the Bluetooth® for pairing.

8.3 Activate the Pool Cleaner Using your Mobile Smart Device

1. Activate the MyDolphin™ Plus app.
2. Click Agree and allow all the required permissions.
3. Sign up by creating an account or using your Gmail/Facebook accounts.
4. Select the "Cordless" power source. The app will search for your robot.
5. Alternatively, press "Search for your robot manually" to pair with your pool cleaner.
When the app finds your robot, tap on the robot image to connect.
6. The app will start pairing with your robot. Please wait until the robot's LED blinks green and you
receive a success message in the app.
7. Name your new Dolphin robotic cleaner and you're ready to go. If you start the cleaning cycle via
the app, you will get a notification that your robot is at the end of its cleaning cycle.
NOTE: Next time you open the app, you will be prompted to fill in the warranty.
TIP: While pairing, if the app is stuck for over 2 minutes, close the app and retry pairing it.
8 Robotic Pool Cleaner LIBERTY
| User Instructions