Export The Trace File To Floppy; System Guide - Xerox DocuPrint 115 System Manual

System Guide

Export the trace file to floppy

Common Controller
To export the trace file to a floppy, perform the following:
1. Insert a blank, formatted floppy into the floppy drive.
2. Type
volrmmount -i
3.and press <Enter>.
4. If you used the "compress" command above, type
cp FileName.txt.Z /floppy/floppy0
5. and press <Enter>. If you did not use the "compress"
command above, type
cp FileName.txt /floppy/floppy0
6. and press <Enter>.
7. Type
eject
8. and press <Enter>.
Hints and Tips
10-9