Billing; Billable Events - Xerox DocuPrint 115 System Manual

Accounting and Billing

Billing

Billable Events

8-2
• Version 3.1: This version will export all entries that are new
and old and zero and non-zero values. This version is similar
and includes the same exported values as Version 3. Version
3.1 also includes the following fields:
– Interrupt Status: Options are Interrupt and Interrupted.
– Job Source: Indicates the Gateway through which the job
was submitted.
– RIP Interrupt Time: This value displays how long the job
was suspended in the ripping status if the job was
interrupted by a "Print Now" job.
• Version 4.0: This version is similar and includes all the same
values as Version 3.1. However, it also includes the exported
value for Trapping. The number displayed will be the total
number of pages trapped within a job.
NOTE: For Continuous Feed (CF) printing systems, the DocuSP
billing meters are not maintained. For CF systems, billing meters
are maintained within the print engine. For additional information,
contact a Xerox Service Representative.
Xerox billable events include the following:
• Administration pages, such as the banner page or error page
• Internal reports, such as billing reports or accounting reports
• All completed sets and stacks
• Sample jobs
• Any partial sets that are generated by a programming
conflict, a PDL error, or when a job is cancelled by the
operator during printing
• Blank sides created as part of the job
Administration pages and sample jobs will be billed as 1-sided
sheets.
Billable events do not include the following:
System Guide
Common Controller