Xerox DocuPrint 115 System Manual page 30

Security and Network Setup
4-6
This document details each service impacted by the script so
that customers can make informed decisions about whether this
script meets the security requirements of their environment.
Some customers may find that some features disabled by this
script, such as telnet and ftp, are required in their environment.
How to re-enable each individual service is not discussed in this
document. If further assistance is required, please contact the
Customer Support Center.
NOTE: Security changes are not saved during an installation or
upgrade of the DocuSP software. When a software install or
upgrade is performed, the Xerox Service Representative runs
the security script at the completion of the installation. Any
adjustments made to the security features by the customer prior
to the installation or upgrade need to be made again.
The following list documents the Sun Solaris services that are
disabled when the Xerox DocuSP Security Script is run:
• ftp (must be enabled for DigiPath and Continuous Feed
systems)
• telnet
• echo
• Discard
• Daytime
• Chargen
• Time
• Name
• Finger
• Uucp
• Talk
• Comsat
• Exec
• Dtspc
• Rpc.rusersd
• Rpc.sprayed
• Rpc.rwalld
• Kems_server
• Rquotad
System Guide
Common Controller