Set Lp/Lprcopycount Utility - Xerox DocuPrint 115 System Manual

Printing

Set lp/lprcopycount utility

5-6
• This utility changes the PCL decomposer default line
termination. This utility should not be used in a mixed PCL
and ASCII environment. This is because PCL data streams
can include another line termination escape sequence. Such
a job will change the line termination setting again (possibly
without the user's knowledge).
• The process is the same to set the line termination value
back to the default.
• This change may be erased upon an upgrade.
• Mainframe users typically require a setting of "3". However,
trial and error may be required.
• Mainframe applications often have the ability to change line
termination settings. An adjustment at the mainframe is
always more desirable than using this utility.
The setlpcopycount utility allows the DocuSP customer to modify
the behavior of how the lp/lpr gateway should handle a copy
count of one. Beginning with DocuSP version 1.41.06, the
default setting ignores a copy count of one placed on the job by
the lp/lpr submission protocol. This allows the internal copy
count set by the PDL to take precedence. The following utility
allows a customer to return the DocuSP to its original behavior:
either imply a copy count of one when none is specified or honor
a copy count of one if specified on the command line. This copy
count of one will take precedence over the copy count set by the
PDL.
Syntax of the utility:
setlpcopycount -f option
0 - Specifies that LP will set a copy count of
1 if received.
1 - Specifies that LP will ignore a copy count
of 1 if received.(default)
No option will display current setting
Example:
docusp_printer% su root
Password:
# cd /opt/XRXnps/bin/
# ./setlpcopycount -f 0
System Guide
Common Controller