Ascii And Pcl Printing Utility; Impact On Docusp Printers - Xerox DocuPrint 115 System Manual

Common controller
Hide thumbs Also See for DocuPrint 115:
Table of Contents

Advertisement

Printing
Event
Sequence
Job ABC
1
Received, assigned
Job ID 1
2
"Receiving Data"
3
Still "Receiving Data" "Receiving Data"
4
Still "Receiving Data" "Pending"
5
"Pending"

ASCII and PCL Printing Utility

Impact on DocuSP printers

5-4
With FIFO Job Scheduling disabled, the Controller will schedule
the jobs for print as soon as they complete their "Receiving Data"
status in Job Manager. Therefore, Job ID 2 will be scheduled for
print before Job ID 1 if Job ID 2 goes "Pending" before Job ID 1.
The following table illustrates an example of FIFO Job
Scheduling.
Table 5-1.
Job XYZ
Received, assigned
Job ID 2
Still "Pending"
ASCII printing within various environments results in output that
is not always formatted as desired. Unfortunately, there is no
"standard" method for printing ASCII files. ASCII is a character
set and is not a Page Description Language. Therefore, ASCII
files do not contain format commands nor is there a de facto
standard for ASCII formatting. However, users often have the
requirement to match a specific format. The utility below helps
enable this formatting flexibility along with the feature in Queue
Manager that enables the ability to select the default document
format.
The DocuSP software automatically wraps ASCII files with a
predefined set of PostScript code and sends the data through
the PostScript decomposer. Unfortunately, this predefined
formatting does not always meet customer ASCII printing needs
and there are no "knobs" to change the formatting within
PostScript.
Limited FIFO
Limited FIFO
Enabled
Disabled
Job 2 prints
first
Job 1 prints
first
System Guide
Common Controller

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint 135Docusp 3.6

Table of Contents