Energy Saving Settings - Xerox WorkCentre 6400S System Administrator Manual

Administrator Tools

Energy Saving Settings

Note: If your printer is locked, you must log in as a system administrator. For details, see
Administrator Access at the Control Panel
At the printer control panel, press the Machine Status, then touch the Tools tab.
1.
Touch Device Settings > General > Energy Saver.
2.
3. Touch the arrows to set the time that the printer will wait to switch from:
Standby Mode to Low Power Mode
•
Low Power Mode to Sleep Mode
•
152 WorkCentre 6400 Multifunction Printer
System Administrator Guide
on page 15.
System