Table of Contents
Advertisement
3.
How to Set up
Initialization of All Settings
The following operation enables to reset all settings to the factory default. It is only for the settings. Measured
active energy, reactive energy, and operating time are not changed.
For details on the initialization of maximum and minimum values, refer to 3.16 Initialization of Related Items
by Changing a Setting.
*For example, if the phase wire system setting is changed by initializing all settings, all maximum and minimum
values will be reset.
To initialize all settings, display the CANCEL screen in the setting mode and then execute the following
operation.
For details on how to display the CANCEL screen, refer to 3.1 Setting Flow
Setting mode
CANCEL screen
Note
When all settings are initialized, back up the logging data before the initialization.
Press
and
RESET
PHASE
simultaneously for 2 seconds.
55
.
Initialization completed
Operating mode
Advertisement
Table of Contents
