Mitsubishi Electric ME96SSRB-MB User Manual page 9

Safety Precautions
■Precautions on storage
To store the instrument, turn off the power supplies of auxiliary power and input circuit, remove the wires
from the terminals, and then put them in a plastic bag.
For long-time storage, avoid the following places. Otherwise, there is danger of an instrument failure or
reduced product life time.
 The ambient temperature exceeds the range -25°C to +75°C.
 The average daily temperature exceeds +35°C.
 The relative humidity exceeds the range 0 to 85% RH, or condensing.
 Exposed to much dust, corrosive gas, salty environment, or oil mist.
 Exposed to excessive vibration or impact.
 Exposed to rain or water drops.
 Exposed to direct sunlight.
 Pieces of metal or inductive substances are scattered.
■Warranty
 The warranty period is for one year from the date of your purchase or 18 months after the
manufacturing date, whichever is earlier.
 During the warranty period, if any failure occurred in standard use that the product is used in the
condition, method, and environment followed by the conditions and precautions described in the
catalog and user's manual, we would repair the product without charge.
 Even within the warranty period, non-free repair is applied to the following cases.
① Failures caused by the customer's improper storage, handling, carelessness, or fault.
② Failures caused by faulty workmanship
③ Failures due to faults in use or undue modification
④ Failures due to force majeure such as a fire or abnormal voltage or due to natural disasters such as
earthquakes, windstorms, or floods.
⑤ Failures caused by the problem in question that could not be predicted with the technology available
at the time the product was shipped.
 Our company shall not be liable to compensate for any loss arising from events not attributable to our
company, customers' opportunity loss or lost earnings due to failure of the product, any loss, secondary
loss, or accident caused by a special reason regardless of our company's predictability, damage to
other products besides our products, or other operations
■Replacement cycle of the product
It is recommend that you renew the product every ten years although it depends on your use condition.
The long-term use of the product may cause discoloration of the LCD or a product malfunction.
■Disposal
 Treat the product properly as industrial waste.
 ME-0000BU-SS96 or ME-0000BU25-SS96 (optional plug-in module) is equipped with a lithium
battery. The lithium battery is disposed of according to the local regulation.
 In EU member states, there is a separate collection system for waste batteries. Dispose of batteries
properly at the local community waste collection/recycling center.
For ME-0000BU-SS96 or ME-0000BU25-SS96, the following symbol mark is printed on the
packaging.
Note: This symbol is for EU member states only.
The symbol is specified in Article 20 'Information for end-users' of the new EU Battery Directive
(2006/66/EC) and the Annex II.
The above symbol indicates that batteries need to be disposed of separately from other wastes.
ME-0000BU-SS96 or ME-0000BU25-SS96 (optional plug-in module) is equipped with a
CAUTION
lithium battery. Therefore, if it is thrown in fire, heat generation, burst, or ignition may occur.
The lithium battery is disposed of according to the local regulation.
■Packaging materials and user's manual
For reduction of environment load, cardboard is used for packaging materials and the manual is printed
with recycled papers.
8