Other Methods Of Installation - Xerox Phaser 8510MFP Advanced Features Manual

Other Methods of Installation

Install your system on a Windows 98 SE network using PhaserPort software.
PhaserPort Software
The Windows installer installs PhaserPort for Windows (for those installations using
PostScript drivers). PhaserPort for Windows is a Xerox print monitor for printing over
Windows 98 SE TCP/IP peer-to-peer networks. PhaserPort can be used to add or remove TCP/
IP ports.
Note: PhaserPort is the preferred utility for PostScript installations.
Adding a Port
To add a port:
1.
Open Printer Properties for the system you would like to attach to the new TCP/IP port.
2.
Click Start, click Settings, and then click Printers.
3.
Right-click the system to be attached to the new TCP/IP port, and then click Properties.
4.
Click the Details tab, and then click the Add Port button.
5.
Select Other.
6.
From the list of available printer-port monitors, select PhaserPort, and then click OK.
Configuring a Port
PhaserPort enables you to:
■ Choose a name for the new port.
Identify a system by its DNS Name or IP Address.
■
To install a port using PhaserPort:
1. In the Add PhaserPort window:
Enter a unique name for the port being added in the Description section.
■
■ Enter the system host name or IP Address in the DNS/Address section.
2.
Click OK.
Phaser® 8510/8560MFP Multifunction Product
3-13
Windows 98 SE