Xerox Phaser 8510MFP Advanced Features Manual page 65

Setting the System Date and Time
Some system features, like Scheduled Warmup mode and Job Accounting, rely on the system
date and time settings to initiate functions and report usage information. To change the system
date and time, use one of the following options:
■ The system's control panel
■ CentreWare IS
Using the Control Panel
To change the system's date and time setting on the control panel:
1.
Press the System button.
2.
Select
General Setup
3.
Select
System Controls
4.
Select
Date and Time
settings for the ,
Year
5.
To change one of the date/time settings:
a.
Select the appropriate setting, and then press the OK button.
b. Press the Up Arrow or Down Arrow button to select a value, and then press the
OK button.
Using CentreWare IS
To change the system's date and time setting using CentreWare IS:
1. Launch your web browser.
2. Enter your system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Select the General folder on the left sidebar, and then select Date and Time. The window
displays the system's current date and time setting.
5. To change the date or time, select the new values from the drop-down lists.
6. Click the Save Changes button at the bottom of the screen.
Phaser® 8510/8560MFP Multifunction Product
, and then press the OK button.
, and then press the OK button.
, and then press the OK button. The system displays the current
, , ,
Month Day Hour Minute
4-4
, and .
Second
System Settings