Table of Contents
Advertisement
Automatic Color Corrections
The Automatic color correction selection applies the best color correction to each element
(text, graphics, and images) in your job. You can also select the color table the system uses for
these elements.
The system uses the following color tables:
Automatic Color Setup Tab
Office Color
Press Match
Spot Color
Note:
The Spot Color tab has an option to allow the system to manage spot colors. This
option is selected by default; click to remove the check mark and disable the option.
To use the default color table associated with a particular element on the tab, you can select
Automatic or click the Reset button.
You can make additional color adjustments to the lightness, contrast, saturation, cyan/red
gamma function, magenta/green gamma function, and yellow/blue gamma function used for a
particular element.
Phaser® 8510/8560MFP Multifunction Product
Description
Controls the RGB color adjustments.
Controls the CMYK color adjustments.
Controls spot color matching.
1-11
Using Color Corrections
Default Color Table Used
sRGB Display
Commercial Press
Spot Color
Advertisement
Table of Contents
Troubleshooting
