Using CentreWare IS
To change the default control panel language using CentreWare IS:
1.
Launch your web browser.
2.
Enter your system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select the General folder on the left sidebar, and then select System Defaults.
5.
In the User Preferences area, select the language from the Set Control Panel Language
drop-down list.
6.
Click the Save Changes button at the bottom of the screen.
Setting Control Panel Accessibility Behavior
Control panel accessibility settings modify the control panel behavior to improve accessibility
for some individuals with disabilities. There are two control panel accessibility settings:
■
Off: The control panel times out after a short period of no activity. Holding down a key
results in multiple entries of that key.
On: The control panel does not time out. Holding down a key does not result in multiple
■
entries of that key.
To adjust the control panel accessibility settings, use one of the following options:
The system's control panel
■
■
CentreWare IS
Using the Control Panel
To turn on/off control panel accessibility on the control panel:
1.
Press the System button.
2.
Select
General Setup
3.
Select
Control Panel Setup
4.
Select
Accessible Control Panel
5.
Select
or
, and then press the OK button.
On
Off
Using CentreWare IS
To turn on/off control panel accessibility using CentreWare IS:
1.
Launch your web browser.
2.
Enter your system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select the General folder on the left sidebar.
5.
Select System Defaults.
6.
Select On or Off from the Accessible Control Panel drop-down list to change the setting.
7.
Click the Save Changes button at the bottom of the screen.
Phaser® 8510/8560MFP Multifunction Product
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
4-3
System Settings