Xerox Phaser 8510MFP Advanced Features Manual page 66

Controlling Startup Page Printing
The system can produce a Startup page each time the system is turned on or reset. The factory
default is On. You can print the Startup page at any time from the
To turn on/off automatic printing of the Startup page, use one of the following options:
■ The system's control panel
■ CentreWare IS
Using the Control Panel
To turn on/off automatic printing of the Startup page on the control panel:
1.
Press the System button.
2.
Select General Setup
3. Select
System Controls
The is highlighted. The setting (
Startup Page
4. Press the OK button to change the setting.
Using CentreWare IS
To turn on/off the automatic printing of the Startup page using CentreWare IS:
1.
Launch your web browser.
2.
Enter your system's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select the General folder on the left sidebar.
5.
Select System Defaults.
6.
Select Off or On from the Startup Page drop-down list to change the setting.
7.
Click the Save Changes button at the bottom of the page.
Printing the Startup Page from the Control Panel
To print the Startup page on the control panel:
1. Press the System button.
2. Select , and then press the OK button.
Information
3. Select
Information Pages
4. Select
Startup Page
Note: You can also print the Startup page from the Troubleshooting tab of the Windows
printer driver.
Phaser® 8510/8560MFP Multifunction Product
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button to print.
4-5
Information Pages
or ) is displayed.
On Off
System Settings
menu.