Web Printer Manager Tool; Module Introduction - Xerox 6050 Customer Training Manual

Module introduction

Materials required
FreeFlow Accxes Software Tools Training Guide
This module describes the Web Printer Manager
Tool. It is part of the controller firmware that
supports the WIDE FORMAT PRINT SYSTEMS
8825/ 8830/ 8850/ 510 and 721P. The 6030/6050
WIDE FORMAT PRINT SYSTEM needs to have a
FreeFlow Accxes controller connected to it in
order to use the Web Printer Manager Tool. It is
accessed using a Web browser.
The Web Printer Manager Tool provides the
following functions:
Print job management
Printer default parameter set-up
Job accounting mode selection
Objectives When you have finished this module, you should
be able to:
Log on to the Web Printer Manager Tool
Monitor print jobs
Set printer defaults (key operator or system
administrator).
You must have the following items before
beginning this module:
WIDE FORMAT PRINT SYSTEM
8825/8830/8850/ 510DP, 721P, or the
6030/6050 WIDE FORMAT printer with the
FreeFlow Accxes Print Server loaded with
FreeFlow Accxes Firmware 11.0
The IP Address of the printer
• A copy of the 11.0 FreeFlow Accxes Firmware
Release Notes
• A copy of the Xerox FreeFlow Accxes System
& Web Printer Manager Tool Setup Guide
The file that contains the Web Printer Manager
Tool help files (example: wenglish.hlp), which
you need to load into the printer. The help file

Web Printer Manager Tool

5