Xerox 6050 Customer Training Manual page 35

FreeFlow Accxes Software Tools Training Guide
6. Before you select the Sets Build key, does the Scan
System need to be in Copy Mode or Scan Mode?
____________
Go to the XEROX WIDE FORMAT COPY SYSTEM User
Guide and read the "Clearing the scanned images"
section (Check the Index for the page number).
7. Press the C/CA key. Follow the procedure in the user
guide to clear all images.
What change did you observe in the cylinder icon? Why
did the change occur?
____________________________________
____________________________________
NOTE: Normally, when a document is scanned,
two files are created and stored on the hard disk
in the controller. A small preview image is stored
as a JPEG file, while the high-resolution image is
stored as a TIFF Group 6, PDF, or CALS1 file.
When an image is retrieved using the DRT, only
the high-resolution image is retrieved. If the
Create Preview option is disabled, then the
preview file is not created.
When you have finished, proceed to the Machine
Observations - Feedback Sheet on the next page.
Check your understanding.
31