Using The Client Tools - Xerox 6050 Customer Training Manual

Using the Client Tools

FreeFlow Accxes Software Tools Training Guide
Installing the Client Tools
Do the following to install the ACT software. (If
you did the AMT module in this document,
then it is already installed and you can skip
this section.)
Insert the Client Install CD into a CD-ROM.
If you downloaded the software from the
www.xerox.com
Open the downloaded zip file.
-
Extract the files.
-
- Select the install.exe file to start the
install software.
On the first screen, choose the language.
On the "Enter Password" screen, press the
Next button.
Follow the directions on the screens.
On the "Choose Shortcut Location"
screen, choose where you want the
shortcut to show, such as "On the
Desktop".
On the "Choose Install Set", choose the
FreeFlow Accxes Client Tools button to
install only the ACT software. You will
need the ACT software for this training
module.
Configure Your Network Connections
At the printer Control Panel or Web Printer
Manager Tool, check that the Subnet Mask, IP
Address, and Gateway settings are correct.
These are needed so that your workstation will
be able to communicate with your FreeFlow
Accxes compliant scanner and printer.
For the WIDE FORMAT PRINT SYSTEMS 721P,
and 6030/6050 WIDE FORMAT printers:
On the Web Printer Manager Tool, select
Printer Defaults, Network, TCP/IP.
website:
37