Starting The Web Printer Manager Tool - Xerox 6050 Customer Training Manual

Starting the Web Printer Manager Tool

FreeFlow Accxes Software Tools Training Guide
Shut down the YKE controller from the
-
PRINTER DEFAULTS > UTILITIES >
Shutdown screen.
- Change the priority of, or delete any job in,
the print queue
- Set up all printer defaults
Load stamps
-
Specify the Job Accounting mode for
-
remote print jobs
Upload controller and printer firmware
-
updates
Upload Feature Keys to the Controller,
-
such as the optional Scan-to-Net, Scan-to-
Print, PostScript, and Job Accounting.
- Enable or disable the media mismatch
queue from the Printer Defaults >
Processing Defaults > Media Page of the
Web Printer Manager Tool.
Use the Rendering Page to change the
-
printer default settings for such image
rendering parameters as Contrast,
Lightness, Vector Halftone reproduction
(area fill or fine line optimization), and
Fineline Grayscale Rendering (grayscale
rendering of colored lines). You can also
set the printer's default rendering to a
choice of graphics, photo, or lines & text
document types.
The performance of the Web Printer Manager
Tool, in terms of user wait time, is determined
primarily by:
Network bandwidth and speed
Amount of data being transmitted to or from
the printer's Controller
Network traffic.
Do the following to connect to the Web Printer
Manager Tool.
7