Docucolor Printer Specific Changes; New Printer; Color Image Quality Enhancements; Source Profile Override - Xerox 6100BD - Phaser Color Laser Printer Getting Started Manual

DOCUSP 4.1

DocuColor printer specific changes

16
The following are new features specific to the DocuColor iGen3,
and the DocuColor 2045, 2060, 5252, 6060, and 8000 printers.

New printer

This release of DocuSP introduces a new DocuColor printer, the
DocuColor 8000. The DocuColor 8000 is an 80 page per minute
full color printer.

Color image quality enhancements

SWOP Plus allows the user to take advantage of the popular
SWOP look but leverages the digital press gamut.
Maximum grey color removal reduces the level of C, M, and Y to
produce more black (K) replacement. While the overall color can
be impacted, the benefit in reduced color toner usage can be
applied in less critical color applications.
New halftone screens are available to enhance image quality.
The specific halftone values vary based on printer model and are
optimized for the specific printer model.

Source Profile override

Source profile overrides are now available as user selections
from the client job submission applications and at the DocuSP on
a page, job, and queue level. The DocuSP job attribute
precedence model applies to this override option.

Page Parallel RIP enhancements

This release of the DocuSP software automatically restricts the
interface for the queue property option settings to restrict the
ability to set VI object cache and parallel RIP at the same time.
♦
Enable/disable parallel RIP now enables or disables all
parallel RIP behaviors. Previous releases required the user
to disable the parallel RIP capability by manually creating an
unprotected queue.
♦ If VI object cache is enabled, parallel RIP is automatically
disabled. If parallel RIP is enabled, VI cache is automatically
disabled.
This behavior was initially available in DocuSP patch version
3.8.18 or higher.
XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED