Web Printer Manager Tool Requirements - Xerox 850DP - Phaser Color Solid Ink Printer User Manual

Web Printer Manager Tool Requirements

To use the Web Printer Manager Tool (Web PMT), you must have the following software and
hardware:
Ÿ WIDE FORMAT PRINT SYSTEMS 8825, 8830, 8850, 8855, 510DP, 721P, or X2
TECH
Ÿ
AccXES Controller
Ÿ For the 6030 WIDE FORMAT and 6050 WIDE FORMAT printers, which have their
own embedded controller, the AccXES Print Server is required to use the Web PMT.
(See the Configure Remote Printer page.)
Ÿ Memory (RAM): Factory installed RAM varies from 64 MB to 192 MB depending upon
AccXES Controller model.
Ÿ
AccXES Controller with the integrated 10/100 BaseTX (Access to the Web PMT is not
supported over the 3003 XTP NIC, the serial port, or the parallel port.)
- Tower Controller 2.0 (UP8) for 8855
- Embedded Controller 2.0 (N5T/CNG) for 8830 and 8850
- Embedded Controller 3.0 (EV4) for 8825
- Standalone Controller for WIDE FORMAT PRINT SYSTEM X2 TECH (KLF)
- Standalone Controller for all printers when available (HFT)
Ÿ Note that a 9GB or larger capacity hard drive is recommended to support the optional
Color Scan-to-Net and scan-to-print.
Ÿ Optional Finishing Device (Folder)
Ÿ Optional Adobe PostScript feature license to support PostScript printing
Ÿ Optional Scan-to-Net feature license to support Scan-to-Net
Ÿ Optional Scan-to-Print feature license
Ÿ Desktop computer with Netscape Navigator 7.0 (or newer) or Microsoft Internet
Explorer 5.5 (or newer) installed.
Ÿ Screen resolution required is 800x600, or higher.
Ÿ A network connection based on the TCP/IP protocol
Web Print Manager Tool User Guide Page 7