1.2
Unit Rear Panel
The SecureSync rear panel contains the connectors for all input and output references.
Figure 1-3:
Optional input/output connectors depend on the installed option cards.
Typically, option cards will be installed at the factory. Should you purchase an extra
option card at a later point, you will need to undergo field installation (for technically pro-
ficient service personnel only).
SecureSync 2400 Getting Started Guide Rev. 4
GPS/GNSS
antenna connector
(BNC female connector)
10 MHz output
(sub HD15 connector)
Multi I/O
out, configurable DCLS Output (BNC female connector)
1PPS
1GB Ethernet (RJ45 connector)
ETH0
Ethernet (SFP connector)
ETH1
(RJ45 connector)
Serial console
Two or six slots for
option cards
input connection
AC power
Standard rear panel
(SMA)
1.2 Unit Rear Panel
7