Safran SecureSync 2400 Getting Started Manual page 24

2.2 SAFETY
Symbol
SAFETY: Before You Begin Installation
18
Signal word
Analog Ground
Recycle
DANGER! If the equipment is used in a manner not specified by the man-
ufacturer, the protection provided by the equipment may be impaired.
DANGER! — INSTALLATION OF EQUIPMENT:
Installation of this product is to be done by authorized service personnel only.
This product is not to be installed by users/operators without legal author-
ization. Installation of the equipment must comply with local and national elec-
trical codes.
DANGER! — DO NOT OPEN EQUIPMENT, UNLESS AUTHORIZED:
The interior of this equipment does not have any user-serviceable parts.
Contact Safran Navigation & Timing Technical Support if this equipment
needs to be serviced. Do not open the equipment, unless instructed to do so
by Safran Navigation & Timing Service personnel. Follow Safran Navigation
& Timing Safety instructions and observe all local electrical regulatory
requirements.
DANGER! – IF THE EQUIPMENT MUST BE OPENED:
Never remove the cover or blank option card plates while power is applied to
this unit. The unit may contain more than one power source. Disconnect AC
and DC power supply cords before removing the cover to avoid electrical
shock.
Definition
Shows where the protective ground terminal is connected
inside the instrument. Never remove or loosen this screw!
Recycle the mentioned components at their end of life. Fol-
low local laws.
SecureSync 2400 Getting Started Guide Rev. 4