Martin MAC One User Manual page 31

PAN/TILT
SPEED
EFFECT
LINEAR
SQUARE LAW
INV SQ LAW
DIMMER CURVE
S-CURVE
OFF
TUNGSTEN
EMULATOR
ON
EXTENDED COLOR
COLOR MODE
CALIBRATED
ENABLED
VIDEO TRACKING
DISABLED
ON
DMX RESET
OFF
ON
EFFECT
SHORTCUT
OFF
CONSTANT FAN FULL
CONSTANT FAN MEDIUM
CONSTANT FAN LOW
COOLING MODE
CONSTANT FAN ULOW
REGULATE FANS
STANDARD
SMOOTH
FAST
FOLLOW P/T
STANDARD
SMOOTH
FAST
®
Martin MAC One User Manual Rev. B
Adjust speed of pan and tilt movement
Effects speed follows pan/tilt speed
setting
Adjust speed of effects movement
Optically linear dimming curve
Square law dimming curve
Inverse square law dimming curve
S-curve (fixture emulates incandescent
lamp voltage linear RMS dimming
curve)
Color temperature and dimming
characteristics emulate incandescent
tungsten lamp behavior
Color mixing optimized for saturation
Color mixing optimized for even color
rendition across multiple fixtures
Color fading optimized for speed of
color changes
Color fading optimized for smoothness
Fixture can be reset via DMX
Fixture cannot be reset via DMX
Effects take shortest route during
changes, crossing open positions if
necessary
Effects avoid open positions during
effects changes
Fans optimized for maximum light
intensity, fans run at full speed, light
intensity reduced if necessary to keep
fixture within temperature limits
Fans run at medium speed, light
intensity reduced if necessary to keep
fixture within temperature limits
Fans run at low speed, light intensity
reduced if necessary to keep fixture
within temperature limits
Fans optimized for lowest noise, fans
run at ultra-low speed, light intensity
reduced if necessary to keep fixture
within temperature limits
Compromise between light intensity and
quietness, fan speed temperature-
regulated, light intensity only reduced if
fans reach full speed and further action
necessary to keep fixture within
temperature limits
31