Fixture Self-Testing; Manual Control - Martin MAC One User Manual

To view the DMX values being received:
1. Select DMX LIVE and use the UP and DOWN buttons to scroll through the value being received on
each channel.
2. To return to the previous level of the menu structure, press MENU.

Fixture self-testing

You can run automatic self-test sequences using the onboard control panel, RDM or P3.
You can:
• Run a sequence that tests all of the fixture's effects including pan and tilt.
• Test LED functionality only.
• Test effects without testing pan and tilt.
• Test pan and tilt functionality only.

Manual control

The manual control functions are available using the onboard control panel only. You can manually reset
the fixture or control individual effects.
Resetting the fixture
You can reset the entire fixture to return it to its state when you powered it on. To carry out a full reset,
select MANUAL CONTROL → RESET → ALL, select YES or NO and press ENTER. The entire fixture will
reset as if you had cycled power. The full reset process will take several seconds.
Manual control of effects
You can control all the fixture's effects including pan and tilt manually without the need for a DMX signal.
To manually control the fixture:
1. Select MANUAL CONTROL and then use the UP and DOWN buttons to scroll to the effect that you
want to control. Press ENTER.
2. Use the UP and DOWN buttons to scroll to the DMX value from 000 to 255 that you want to send to
that effect. Press ENTER to confirm and send that value.
3. To return to the list of effects, press MENU.
4. If you want to manually control other effects together with the first effect, repeat steps 1. and 2. and 3.
above for the other effects.
The fixture will continue to show the effects that you have set manually until you set new manual
control values for the effects.
Exiting the MANUAL CONTROL menu by pressing the MENU button stops all the effects immediately.
The effects are unaffected by a power OFF/ON cycle: if you power the fixture off and on again, it will
resume showing the effects.
When in manual control mode, pressing any button on the control panel lights up the control panel display
and shows the message MANUAL CONTROL MODE.
20
®
Martin MAC One User Manual Rev. B