Data Connections - Martin MAC One User Manual

clockwise. Twist the cable connector counterclockwise and remove it from the connections panel to
disconnect.
The fixture does not have an on/off switch. It becomes active as soon as power is applied at the power
input connector. Be prepared for the head to move suddenly and for the fixture to emit bright light as soon
as power is applied.

Data connections

See the MAC One User Manual available for download from www.martin.com for full details of connecting
the fixture to control data.
Use data cable that meets the following specifications:
•
DMX cable must be shielded, twisted-pair, high-quality dedicated DMX cable only. Microphone cable
is not suitable.
•
Ethernet cable must be shielded, twisted-pair, type S/UTP, SF/UTP, S/STP or SF/STP only. The cable
must be rated Cat 5e or better. The cable shield must be electrically connected to connector housings,
and the other devices on the data link must also support shielded connections.
®
Martin MAC One Safety and Installation Manual Rev. B 13