Table of Contents
Advertisement
1.888.610.7664
8 Using the product
Aligning the flue gas probe
The flue gas must be able to flow freely past the thermocouple.
•
Align the probe by turning it as required.
The tip of the probe must be in the core current of the flue gas flow.
•
Align the flue gas probe in the flue gas duct so that the tip is in the core
current (area of the highest flue gas temperature).
8.2.3
Setting fuel
To carry out a flue gas measurement, the fuel must be set correctly.
1
Press
[CONFIG/ESC]
configuration menu and open the
Fuel type
list with [MENU/ENTER].
The list of selectable fuel types is shown.
22
www.calcert.com
15
10
20
5
25
0
30
to open the
sales@calcert.com
Advertisement
Table of Contents
