Table of Contents
Advertisement
1.888.610.7664
9 Smart App
9.3.3
Perform flue gas measurement
In order to maintain the measuring accuracy of the instrument, the
correct fuel must be selected or configured.
To achieve usable measurement results, the test time of a flue gas
measurement should be at least 3 minutes and the measuring
instrument should display stable readings.
Up to four Smart Probes can be used simultaneously during flue gas
measurement. This enables parallel measurement of the combustion air
temperature, the differential temperature and the differential pressure.
The following Smart Probes can be connected:
testo 915i (0563 4915), testo 510i (0560 1510), testo 115i
(0560 2115 03)
Select measurement type
1
Open the main menu with
Measuring
modes.
2
Select the measurement type
Carry out the measurement
1
Start measurement: [Start].
The readings are displayed.
2
Quit measurement: [Stop].
3
Save measured values in the app: [Save].
4
Remove flue gas probe from the flue gas duct and purge with fresh
air.
In the
Basic view
application menu, the current measuring values can
be read, recorded and saved. The Basic view is particularly suitable for
fast, uncomplicated measurements without the specific requirements of
a standard-compliant measurement.
®
All Bluetooth
probes compatible with the testo Smart App are
displayed in the
Basic
42
www.calcert.com
15
10
20
5
25
0
30
and click on
to select
Flue
gas.
view.
sales@calcert.com
Advertisement
Table of Contents
