Power Supply Operation - TESTO 310 II Instruction Manual

Flue gas analyser
Hide thumbs Also See for 310 II:
Table of Contents

Advertisement

1.888.610.7664
Battery care
Do not fully exhaust the rechargeable battery.
Only store instrument with battery charged and at low temperatures, but not
below 32 °F (0 °C) (best storage conditions with a charge level of 50-75% =
2 segments, at an ambient temperature of 50-68°F (10-20°C), recharge
completely before use).
The rechargeable battery life depends on the storage, operating and
ambient conditions. The available useful life of the rechargeable battery
reduces more and more with frequent use. If the useful life is significantly
shortened, the rechargeable battery should be replaced.
Charging
7.2
Do not perform any measurements during charging.
Measurements during charging can lead to measurement errors
(measurement accuracy during charging may no longer be within the
specification).
Connect the plug of the power supply to the charging socket on the
1
measuring instrument.
Connect the power plug of the power to a USB-C Connection.
2
The measuring instrument is powered by the Power Supply.
If the measuring instrument is switched off during charging, the
charging process starts automatically.
www.calcert.com
15
10
20
5
25
0
30
7 First steps
15
sales@calcert.com

Advertisement

Table of Contents
loading

Table of Contents