Table of Contents
Advertisement
1.888.610.7664
10 Maintenance
10.1 Calibration
The measuring instrument is supplied with a calibration protocol as
standard.
To
maintain
measurement results, Testo recommends having the testo 310
checked once a year by a Testo authorized service center.
10.2 Cleaning the instrument
Do not use any aggressive cleaning agents or solvents! Mild household
cleaning agents and soap suds may be used.
>
If the housing of the instrument is dirty, clean it with a damp cloth.
10.3 Keeping connections clean
>
Keep screw connections clean and free of grease and other deposits;
clean with a damp cloth as required.
10.4 Removing oil residues
>
Carefully blow out oil residues in the valve block using compressed
air.
10.5 Ensuring measuring accuracy
Testo Customer Service will be happy to help you as required.
10.6 Cleaning the flue gas probe
>
In case of contamination, clean the probe shaft and the handle of the
flue gas probe with a damp cloth. Do not use any aggressive cleaning
agents or solvents! Mild household cleaning agents and soap suds
may be used.
Any cleaning of contamination within the probe shaft may only be
carried out by Testo Customer Service.
www.calcert.com
15
10
20
5
25
0
30
10 Maintenance
the
specified
accuracies
of
the
II
59
sales@calcert.com
Advertisement
Table of Contents
