Table of Contents
Advertisement
1.888.610.7664
10 Maintenance
10.7 Draining the condensate container
The fill level of the condensate trap can be monitored via the markings on the
condensate trap.
Draining the condensate container
Skin irritation due to condensate!
- Avoid skin contact.
- Make sure that the condensate does not run over the housing.
Damage to the sensors and the flue gas pump due to condensate
entering the gas path!
- Do not empty the condensate container while the flue gas pump is in
operation.
1
Hold the instrument upright, so that
the condensate outlet points
upwards.
2
Open the sealing plug of the condensate trap.
3
Let the condensate run out into a sink.
4
Dab off any remaining drops on the condensate outlet with a cloth.
5
Close condensate outlet with sealing plug and press on it firmly.
The condensate outlet must be completely closed, other-wise
measuring errors could occur if external air gets in.
60
www.calcert.com
15
10
20
5
25
0
30
CAUTION
ACHTUNG
sales@calcert.com
Advertisement
Table of Contents
