Description; User Responsibility; What's In The Box; Transporting Methods - ESAB CIGWELD XF190 Operating Manual

BLUEVENOM XF190

2.05 DESCRIPTION

The CIGWELD BLUEVENOM XF190 is here and is loaded with Xtra
Functions that pack a serious sting to help you get your job
done right.
30% smaller than some other machines in its class and lighter
in weight at only 9.5kg' s , the XF190 is an all in 1 multi-process
welding machine with QuickSet Plate Thickness selection
taking the guesswork out of welding!
Plate Thickness setting allows you to set up in a flash! There
is no guessing the welding parameters. Use the QuickSet
feature to set the machine to the correct plate thickness you
are welding.
TIP: You can check the plate thickness with a measuring
device, such as a ruler or vernier caliper. If two different plate
thicknesses are to be joined, then add the two together and divide
by 2 and use the average plate thickness as your setting guide.
The BLUEVENOM XF190 is the perfect solution for light
fabrication, maintenance and repairs or for DIY around the
home, workshop, worksite, or farm without compromising on
quality, safety and performance! With the avid welder in mind,
CIGWELD have introduced "Opti-Start", a feature that allows the
user to customise their starting arc characteristics through
Soft and Hard Start controls.
Navigate with ease through the bright blue 4.3" Sharp LED
panel for superior clarity and 'Plug n' Weld' using a 230/240V
10Amp plug to get you striking that arc in no time!
Backed by a 2 Year Warranty, the XF190 can deliver awesome
arc characteristics in the most popular processes of, MIG
(QuickSet and Manual, Gas & Gasless), STICK (MMAW for
Electrodes with VRD for extra safety) and TIG (DC Lift TIG)
welding modes.

2.06 USER RESPONSIBILITY

This equipment will perform as per the information contained
herein when installed, operated, maintained and repaired in
accordance with the instructions provided. This equipment
must be checked periodically. Defective equipment (including
welding leads) should not be used. Parts that are broken,
missing, partly worn, distorted or contaminated, should be
replaced immediately. Should such repairs or replacements
become necessary, it is recommended that such repairs be
carried out by appropriately qualified persons approved by
CIGWELD. Advice in this regard can be obtained by contacting
an accredited CIGWELD Distributor/service agent.
16 | CIGWELD.COM.AU
OPERATING MANUAL
This equipment or any of its parts should not be altered
from standard specification without prior written approval
of CIGWELD. The user of this equipment shall have the
sole responsibility for any malfunction which results from
improper use or unauthorised modification from standard
specification, faulty maintenance, damage or improper
repair by anyone other than appropriately qualified persons
approved by CIGWELD.

2.07 WHAT'S IN THE BOX

BLUEVENOM XF190 (Part No. W1400190)
• BLUEVENOM XF190 Power Source
CMGBZ15E3 MIG Gun 3m- Euro quick connector
•
• Work Clamp 300A with 3m Lead
• Twist Lock Electrode Holder with 3m Lead
• Feed Rolls: 0.8/0.9 V Groove (fitted). 0.8/0.9mm Gasless
Knurled
• Gas Regulator
• Argon Gas Hose, 2m
• Nylon Inlet Guide for Soft Wires
• Operating Manual
NOTE
Refer to the complete Warranty Schedule at the
back of the manual.

2.08 TRANSPORTING METHODS

This unit is equipped with a handle for carrying purposes.
ELECTRICAL WARNING
ELECTRIC SHOCK can kill.
DO NOT TOUCH live electrical parts.
Disconnect input power conductors from de-
energized supply line before moving the welding
power source.
WARNING
FALLING EQUIPMENT can cause serious personal
injury and equipment damage