Table of Contents
Advertisement
3 TECHNICAL DATA
3.2
Description of main components
3.2.1
Carriage
The carriage is powered by A6 VEC motors (1).
It is equipped with handles (2) and two support wheels (3).
Use the handle bars to tilt the welding machine backwards, the support wheels will now take
the weight and the welding machine can be moved.
3.2.2
Wire feed unit
The unit is used for guiding and feeding the welding wire down into the connector.
3.2.3
Connector
Transfers welding current to the wire during welding.
3.2.4
Guide wheel
The guide wheel is attached to the connector and guides the welding machine along the weld
joint.
3.2.5
Motor with gear (A6 VEC)
The motor is used for feeding the welding wire.
For more information regarding the A6 VEC see Instruction manual 0443 393 xxx.
3.2.6
Control box (PEK)
See Instruction manual 0460 948 xxx, 0460 949 xxx, 0459 839 036.
3.2.7
Flux recovery unit (A6 OPC)
The A6 OPC is used to recover the surplus flux.
For more information regarding the A6 OPC, see Instruction manual 0443 407 xxx.
0819 301 101
- 12 -
© ESAB AB 2020
Advertisement
Table of Contents
