ESAB CIGWELD XF190 Operating Manual page 55

TUNGSTEN ELECTRODE TYPES
ELECTRODE TYPE WELDING
(GROUND FINISH) APPLICATION
3T Rare Earth Suitable for
AC and DC TIG
welding
BLUEVENOM XF190 TIG WELDING FILLER RODS SELECTION CHART
DESCRIPTION CLASS.
AUS/
NZ STD
(NEW)
COMWELD SUPER R2
STEEL
COMWELD LW1 R4
COMWELD LW1-6 R6
FEATURES
Excellent ignition characteristics and consistent welding properties.
Long service life compared to Thoriated Electrodes.
Non Radioactive to improve health and safety for operator and
environment.
CLASS. DIA. PACK
AWS
STD
ER70S-2 1.6mm 5kg Pack
2.4mm 5kg Pack
ER70S-4 1.6mm 5kg Pack
2.4mm 5kg Pack
ER70S-6 1.6mm 5kg Pack
2.4mm 5kg Pack
OPERATING MANUAL
PART NO APPLICATION
321370 Comweld Super Steel is a copper coated 'triple
deoxidised' steel welding rod recommended
321373
for the high quality Gas Tungsten Arc (TIG)
welding of carbon and carbon-Manganese
steels. Comweld Super Steel is deoxidised with
Titanium, Aluminium and Zirconium in addition
to Manganese and Silicon for improved weld
deposit quality. It is the ideal choice for TIG
welding rusty or mill scaled plates and pipes
and the root pass welding of pipes, tanks and
heavy walled root toughness and radiographic
soundness are achieved under high dilution.
321411 Comweld LW1 is a copper coated, double
de-oxidised low carbon steel filler rod suitable
321412
for the oxy-acetylene (fusion) welding and Gas
Tungsten Arc (TIG) welding of a wide range of
mild and medium strength steels. Comweld LW1
is recommended for the TIG welding of steel
pipes, plates and castings with a tensile strength
in the 500 MPa class. It is tolerant to surface
rust and mill scale and is ideal for root pass
welding applications where tough and ductile
welds are produced. When using Comweld LW1
for gas welding applications a neutral to slightly
reducing flame setting is recommended.
321417 Comweld LW1-6 is a copper coated, low carbon
steel filler rod suitable for Gas Tungsten Arc
321418
(TIG) welding of a wide range of mild and
medium strength steels. Comweld LW1-6 is
recommended for the TIG welding of steel
pipes, plates and castings with a tensile
strength in the 500 MPa class. It is tolerant
to surface rust and mill scale and is ideal for
root pass welding applications where tough
and ductile welds are produced. Please Note: A
suitable shielding gas is required
BLUEVENOM XF190
COLOUR CODE
Purple
CIGWELD.COM.AU | 55