Mma (Stick) Welding; Mma (Stick) Mode And Setup - ESAB CIGWELD XF190 Operating Manual

SECTION 7:

MMA (STICK) WELDING

7.01 MMA (STICK) MODE AND SETUP

B
A
A. Process Selection Button.
B. VRD ON/OFF Indicator (MMA/STICK MODE)
The green VRD light illuminates when the VRD is active.
Under this condition the open circuit voltage of the unit
is limited to below 35V DC, thus reducing the potential of
serious electric shock (such as when changing electrodes).
The red VRD indicator illuminates when the VRD is inactive
during welding operation. Under this condition the output
voltage of the unit will be at welding potential which in
most cases exceeds 35V DC.
E
D
Select MMA (Stick)
OPERATING MANUAL
E
C
C. Control Knob.
Turn clockwise to increase the value;
Turn anti-clockwise to decrease the value;
Turn slowly in order to adjust value in small increments.
Turn quickly in order to adjust value in larger increments.
BLUEVENOM XF190
Figure 7-1: MMA (Stick) Mode
CIGWELD.COM.AU | 59