Indication Of Transferred Calls; Conferencing Calls - Mitel 6930 User Manual

H C
ANDLING ALLS
Press the
3.
directory entry (or the desired number if the entry contains more than one number).
: If you have any additional Directory sources configured, you will need to first navigate to the
NOTE
desired Directory folder and then highlight the respective entry or number.
Complete either a blind or consultative transfer:
4.
To complete a blind transfer, press the select button to call the contact and then press the Xfer
a.
softkey before the receiving end answers.
To complete a consultative transfer, press the select button to call the contact. Remain on the
b.
line to speak with Party 2 before pressing the press the softkey configured with Transfer func-
tionality or Xfersoftkey again to transfer Party 1 to Party 2.
To cancel the transfer, press the Cancelsoftkey on the display screen or press

Indication of Transferred Calls

When you transfer an active call, the near-end phone displays a Call Transferredscreen when a call is
transferred and the far-end call is dropped. The figure below illustrates the Call Transferred screen on
the 6930 phone.

Conferencing Calls

You can use the Conf softkey offered on screen when in a connected call to create conference calls or
use a softkey configured with Conference functionality (see
(Directory)key or the softkey configured for Directory functionality and highlight a
on
"Conference Key"
C C
ONFERENCING ALLS
.
page 106).
143