Mitel 6930 User Manual page 77

C Y P
USTOMIZING OUR HONE
Audio Mode Option
Speaker
Headset
Speaker/Headset
Headset/Speaker
:
NOTE
On 6930 IP Phone by default the Audio mode is set to Speaker. When the Headset is connected to
1.
the phone, user must change the Audio mode to Headset or Speaker/Headset or Headset/Speaker.
If a headset is not connected and the user presses the speaker/headset key, the phone goes to
2.
speaker mode regardless of the audio mode.
If a headset is not connected and the user presses programmable key, the phone goes to speaker
3.
mode regardless of the audio mode.
If the user is using the headset and the headset gets disconnected due to out of range, no battery or
4.
has unplugged the headset, the phone goes to handset mode.
If the user comes back to range, the phone goes to headset mode.
a.
If the battery is back or the user plugs the headset back, the phone goes to headset mode if the
b.
user has not switched to any other device.
While the headset is disconnected, the user move away or chose another device, when the
c.
headset reconnect nothing will happen, we will stay on the new chosen device.
If bluetooth (S720) gets disconnected, the phone goes to handsfree mode. To reconnect the user
5.
must manually connect to the buletooth (S720) device.
If bluetooth handset gets disconnected, the audio goes to the wire handset. When the user reconnects
6.
to the bluetooth handset, the audio goes to the bluetooth handset. If the user switches the audio to
Description
This is the default setting. Calls can be made or received using the
handset or handsfree speakerphone. In handset audio mode,
pressing the button on the phone switches to handsfree
speakerphone. In Speaker audio mode, lift the handset to switch to
the handset.
Choose this setting if you want to make or receive all calls using a
handset or headset. Calls can be switched from the handset to
headset by pressing the
from the headset to the handset, lift the handset.
Incoming calls are sent to the handsfree speakerphone first when
the button is pressed. By pressing the button again, you
can switch back and forth between the handsfree speakerphone
and the headset. At anytime, lifting the handset switches back to
the handset from either the handsfree speakerphone or the
headset.
Incoming calls are sent to the headset first when the
is pressed. By pressing the button again, you can switch back and
forth between the headset and the handsfree speakerphone. At
anytime, lifting the handset switches back to the handset from
either the headset or the handsfree speakerphone.
button on the phone. To switch
A
UDIO
button
66