Flash Key; Configuring A Flash Key Using The Mitel Web Ui; Sprecode Key - Mitel 6930 User Manual

C S
ONFIGURING OFTKEYS
For menu and directory services, select a service to display the information for that customized
3.
service. Message services display to the screen after pressing the respective key. For user input
services, follow the on-screen prompts.
To exit from the XMLscreen, press the XMLsoftkey again or press the
4.

Flash Key

You can set a key to generate a flash event when it is pressed on the 6930. You do this by setting the
key to Flash. The IP phone generates flash events only when a call is connected and there is an active
RTP stream (for example, when the call is not on hold).

Configuring a Flash Key Using the Mitel Web UI

Click on Operation > Softkeys and XML.orClick on Operation > Expansion Module <N>.
1.
Softkeys
Select from Key 1through Key 44 on the Top keys.orSelect from Key 1through Key 24 on the Bottom
2.
keys.
In the Typefield, select Flash.
3.
In the Label field, enter a label to display on the phone for the key.
4.
Expansion Module Keys
Select from Key 1through Key 84(M695).
5.
In the Typefield, select Flash.
6.
Click Save Settings.
7.

Sprecode Key

You can set a key to automatically activate specific services offered by the server by setting a key to
Sprecode. For example, if the sprecode value of *82 is configured, then by pressing the key, *82 auto-
matically activates a service provided by the server. The value you enter for this field is dependent on the
F K
LASH EY
button.
102