Table of Contents
Advertisement
UPS5000-A-(30 kVA-120 kVA)
User Manual
Step 4 Push the rear handle into the groove. For details, see the instructions on the
chassis.
1.
2.
Figure 4-13 Pushing the rear handle into the groove
Step 5 Install the front panel.
1.
2.
Figure 4-14 Installing the front panel
Step 6 To prevent misoperations, you are advised to install a lock (diameter of the
effective lock cylinder: 5–6.3 mm) for the maintenance bypass switch.
Issue 17 (2024-02-21)
Push the handle into the groove.
Tighten the screws on the rear handle clockwise.
Insert the lower end of the panel into the UPS.
Gently close the upper end of the panel.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
79
Advertisement
Table of Contents
